Understanding how the roofing is done is an appropriate means for prudent DIYers to save labor costs. However, you shouldn't take this lightly, as roofing installation isn't kids' play! It necessitates adequate time and money to accomplish the project correctly. Thus, comprehending what you are doing is vital. Examining the appropriate roofing technique and considering the best safety and quality practices is always advisable, be it your first time roofing a home or having done it countless times before. This article will guide you on how to roof a house securely and correctly! Also, seek assistance from an experienced roof contractor in Long Beach to ensure you have done everything appropriately. 

Tools and Materials for Installing Roof

    • Air compressor

    • Air hose

    • Asphalt shingles (or other roofing material)

    • Caulk gun

    • Chalk line

    • Circular saw

    • Drip edge

    • Extension ladder or scaffolding

    • Felt underlayment

    • Hook blades

    • Roof safety harness

    • Roofing nailer

    • Roofing nails

    • Scaffolding

    • Sealant

    • Self-adhesive waterproof underlayment

    • Stapler and staples

    • Step and dormer flashing

    • Straightedge

    • Tin snips

    • Utility knife

    • Valley flashing

    • Vent flashing

    • Work gloves

A Step-by-step Guide to Roofing a House

After collecting the materials cited above, now commence with roofing a house. Although the house roofing process is daunting and complex that requires only professional assistance, it doesn't rule out the possibility of success. Thus, we have enlisted straightforward and concise steps to follow for roofing a house, enabling you to finish it swiftly, feasibly, and hassle-free. Since it's a challenging and risky project, particularly for an amateur homeowner, consider contacting roofing companies in Pasadena if you have any doubts. 

    • Acquire the Required Permits:

Before commencing to roof a house, ensure you obtain the necessary permissions, as most states demand permits to verify things are updated. Permissions will prevent you from incurring potential fines if performed without one. 

    • Removing Old Roof:

You must remove the existing roof to install the new roof, aka "tearing off." You may accomplish this using a roof shovel or prybar. However, the easiest and most effective approach is initiating from the top and descending from there. Consider arranging a dumpster or catch-all screen to dispose of the roof's debris. 

    • Perform Any Required Repairs or Reinforcements:

Inspect your roof for water stains, cracks, or other problems once you peel off the shingles. Since your roof's integrity relies on a sturdy sheath, ensuring the roof deck is in pristine shape and suitable for a new roof is vital. 

    • Install the Underlayment:

After completing the roof deck, install the underlayment now. It acts as a buffer between the elements and your house. Use felt paper for your underlayment and fasten it down on both sides with nails every 12 inches. 

    • Set Up the Drip Edge:

Now, install drip edge. It's composed of metal directing water away from your house and off the roof near the gutters. Put at a small angle, less than 45 degrees, with all nails hammered in the flush to ensure they don't protrude through the tiles above it.  

    • Assemble Your Valley Flashing:

Apply valley flashing at this time if your roof comprises valleys. These are one of the few places on your roof where leaks might occur. Installing flashing makes them impermeable, and perform it before installing new shingles. 

    • Install Your Initial Shingles and Nail Down the Remaining Shingles:

Starter shingles are an asphalt layer that runs down the eaves to seal any gaps between your new shingles and the roof edge. It will help you determine how many more shingles you need. Subsequently, begin placing shingles. Ensure your shingles overlap each other before and nail down each row while you lay them, traveling from left to right. More significantly, nail them only in the nail zone to ascertain that they adhere all the way through and don't protrude beneath the next layer on top. 

    • Final Examination and Cleanups:

Attach step and dormer flashing as required, add vents, install your ridge cap, and repair the gutters after layering the shingles. Once you've completed the shingle installation, inspect the roof for crooked or missing shingles and sealed flashing locations, and the ridge top appears seamless. Also, ascertain that there are no protruding nails or underlayment. Lastly, wipe up the area while ensuring no trash or nails are left in the yard.